High compartment is the first choice for office partition decoration. After the installation of glass partition, we still need to pay attention to daily cleaning and maintenance in the process of using glass partition. The main instructions are as follows:

辦公室高隔間的墻體框架分為兩種表面，一種是陽極氧化鋁合金，可清洗，絕不生銹、不腐蝕，布面板僅可用干布擦拭，或用特殊清潔噴劑，不可沾水清洗;除布面板外其余標準面板均可清洗，清洗時不要選用有磨料、強酸成份的清潔劑，以免損傷表面。還有一種是鈦鎂閃銀鋁合金，施工過程中或者客戶在使用中不小心磨花，蹭傷，可直接在當?shù)刭復試娖崽幚?，表面成嶄新的不留任何一點磨傷的花紋，從而幫您降低成本。

The wall frame of the high compartment of the office is divided into two surfaces. One is anodized aluminum alloy, which can be cleaned without rust and corrosion. The cloth panel can only be wiped with a dry cloth or special cleaning spray, and can not be cleaned with water; Except cloth panels, other standard panels can be cleaned. Do not use cleaning agents with abrasive and strong acid components to avoid damaging the surface. The other is titanium magnesium flash silver aluminum alloy. If it is scratched or scratched carelessly during construction or when the customer is in use, it can be directly purchased locally with the same color self painting treatment, and the surface will be a brand-new pattern without any abrasion, so as to help you reduce the cost.

在清潔玻璃隔斷的過程中，要或減少臟污，請使用清潔劑，或其它溫和的清潔劑清潔，以微濕的軟布吸干清潔劑，然后再以水清洗。以適當?shù)娜軇┘坝推帷⒂?、及天然漆，這里需要注意的是，大多數(shù)溶劑都具高可燃性，致于水性漆料，則以氯清潔劑或去漆清洗。對于清洗不掉的頑漬，則使用塑料型、不具研磨性刷子刷即可，切勿使用其它金屬制的鐵刷。

In the process of cleaning the glass partition, to remove or reduce dirt, please use full-effect cleaner or other mild cleaner, dry the cleaner with a slightly wet soft cloth, and then wash with water. Use appropriate solvents and paints, glazes, and natural paints. It should be noted that most solvents are highly flammable. If water-based paints are caused, clean them with chlorine cleaner or paint remover. For stubborn stains that cannot be cleaned, use a plastic brush without abrasiveness. Do not use iron brushes made of other metals.

保養(yǎng)高隔間的時候我們一定要注意，不要以利器在高隔間墻體表面直接切、割、敲打、以免在表面留下刮痕、裂痕及溝孔。除布面板外其余標準面板均可清洗，清洗時不要選用有磨料、強酸成份的清潔劑，以免損傷表面。膠條是保證斯唯鋁合金玻璃隔斷密封，隔音和防水的關鍵，如有脫落要及時修補，更換。在使用過程中，應輕推輕拉，推拉順其自然，變形是鋁合金隔斷老化的主要原因，要保持鋁合金清潔，特別是拼接縫的清潔?？捎梦鼔m器吸去槽內(nèi)和膠條的積灰。

When maintaining the high compartment, we must pay attention not to use sharp tools to directly cut, cut and knock on the wall surface of the high compartment, so as not to leave scratches, cracks and grooves on the surface. Except cloth panels, other standard panels can be cleaned. Do not use cleaning agents with abrasive and strong acid components to avoid damaging the surface. The adhesive strip is the key to ensure the sealing, sound insulation and waterproof of Svay aluminum alloy glass partition. If it falls off, it shall be repaired and replaced in time. During use, push and pull gently. Push and pull naturally. Deformation is the main reason for the aging of aluminum alloy partition. Keep the aluminum alloy clean, especially the joint. The dust accumulated in the groove and the rubber strip can be sucked with a vacuum cleaner.