自動感應門不停的自動開關故障是一種比較常見的自動門故障，這種故障是嚴重影響了所安裝自動感應門進出人員的通行，長時間的濟南感應門不停自動開關還會引發其它故障，且有很大的隱患，除此執之外，自動感應門無感應物體時自行開啟的原因是怎樣的？

The continuous automatic opening and closing failure of the automatic induction door is a relatively common failure of the automatic door. This failure seriously affects the passage of the installed automatic induction door. The continuous automatic opening and closing of the Jinan induction door for a long time will also lead to other failures, and there is a great potential safety hazard. In addition, what is the reason for the automatic induction door to open automatically when there is no inductive object?

1.感應器調整不當：檢查感應器調整鈕將感測角度調小。

1. Incorrectly adjusted sensor: check the sensor adjusting button to reduce the sensing angle.

2.感測區有異物：感測區內存在移動物體，將該物體移開。

2. Foreign matters in the sensing area: if there is a moving object in the sensing area, move the object away.

3.機箱蓋固定不良：檢查機箱蓋螺絲是否鎖緊，重新固定。

3. Poor fixing of the chassis cover: check whether the chassis cover screws are locked and re fix them.、

4.室外感測環境不良：檢查室外環境，改用其他感測方式開啟門扇。

4. Poor outdoor sensing environment: check the outdoor environment and open the door leaf with other sensing methods.

5.感應器調節不當：檢查感應器調整鈕，將關門速度調慢。

5. Incorrectly adjusted sensor: check the sensor adjustment button and slow down the door closing speed.

6.感應器故障：檢查感應器是否誤動作，對其進行調整，損壞更換感應器。

6. Sensor failure: check whether the sensor acts wrongly, adjust it, and replace the sensor if it is damaged.

那么這個讓廣大自動感應門使用者煩惱的故障問題是怎樣引起的呢？又該如何維修處理呢？以上內容中就講解到了信息內容，大家都有什么問題的話http://www.lebimv.cn可以實際上來看看看！

So how did this trouble trouble most users of automatic induction doors? How to repair? The information content is explained in the above content. If you have any questions http://www.lebimv.cn You can actually look at it!